Differences

This shows you the differences between two versions of the page.

--- pub:maplite [2026/02/03 17:41] – d fa
+++ pub:maplite [2026/02/19 12:12] (current) – fa
@@ Line 1: / Line 1: @@
-# mikrotic mAP Lite as a fallback internet connection
+====== mikrotik mAP Lite as a fallback internet connection ======
 After watching this video: [[https://www.youtube.com/watch?v=hSk2VLt_T5c|Using a Phone Hotspot as a Backup WAN Connection]]
@@ Line 7: / Line 8: @@
 Transcript of changed settings below.
-A first test with a laptop connected via ethernet to the mAP and the mAP to the phone hotspot was successful. After that it was connected to the FritzBox 7530 AX's LAN3 port and configured as the "Ausfallschutz" after 3 minutes.
+A first test with a laptop connected via ethernet to the mAP and the mAP to the phone hotspot was successful. After that it was connected to the FritzBox 7530 AX's LAN3 port and configured as the "fallback protection" (Ausfallschutz) after 3 minutes, reverting after 30 minutes. This works fine, except the FritzBox does not automatically revert back earlier if DSL is back. So if you switch off the hotspot the routing is broken until you deactivate the fallback protection. Still ok though. [[https://fritz.com/en/apps/knowledge-base/FRITZ-Box-7530-AX/3946_Configuring-fallback-protection-for-the-internet-connection-in-the-FRITZ-Box|AVM post]]. This needs fritzOS 8.20.
 <file>
@@ Line 54: / Line 55: @@
 		Change ether1 to wlan1
 </file>
+The mAP Lite stays on 192.168.88.1 for now, in case of fallback the FritzBox will get an IP via DHCP in the 192.168.88.0/24 range.